The stainless steel mixing tank consists of a stirring tank body, stirring tank cover, stirrer, support, transmission device, shaft sealing device, etc. It can also be equipped with heating device or cooling device according to the process requirements.

stainless steel mixing tanks

The tank body and the tank cover can be flange sealed or welded together. The mixing tank body and cover can be opened according to the process requirements of feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safety release control and other process control.


Stainless steel stirring tank installation and commissioning need to do what



The upper part of the tank lid is equipped with a transmission device (motor or reducer), which drives the stirrer in the tank by the transmission shaft.


The shaft sealing device can be in the form of machine seal or packing, labyrinth seal and other forms.


The stirrer can be configured in various forms such as slurry, anchor, frame and spiral.


With the ability to resist atmospheric oxidation - that is, stainless, but also has the ability to resist corrosion in media containing acids, alkalis, salts and so on - that is, corrosion resistance. Widely used in the chemical industry petroleum dyestuff China fiber, food, and other industries to store a variety of corrosive media solution.


Stainless steel mixing tank equipment installation, commissioning.


1, check whether there is serious damage and serious deformation of the equipment in transport, as well as check whether the fasteners of the equipment have loosened and other phenomena.


2, the use of pre-buried ground bolts, on a solid foundation for the horizontal installation of the equipment.


3、Under the guidance of professionals, carry out the correct installation of equipment, electrical control devices and accessories, and check whether the pipeline is smooth and whether the instrumentation installed is correct and whether there is damage. Before starting the equipment, please check whether there are people or objects in and around the equipment that affect the normal operation of this equipment to avoid danger.


4、After installation, please run a test run for a few seconds to make sure there is no circuit or abnormal sound before a short test run.


5、If the mixing tank is equipped with mechanical seal, before the main machine starts its seal lubrication tank must be filled with an appropriate amount of 10# or sewing oil, and its seal cooling chamber must be filled with cooling water so that the seal device can be well lubricated and cooled. If the machine seal is not adjusted at the factory, adjust the machine seal according to the installation and use instructions after installation before normal operation.


6、After normal operation of the equipment, please check the bearing temperature, running smoothness, sealing, etc., and whether the instrument is normal, and confirm that it is normal before feeding and running.